Claim explorer / evidence thread
Claim 78118
BARV600 • Ashlee • Paid • 78118
risk 0.70
deadline Overdue / escalation ready
images 59
matched 0
gaps 3
Warranty deadline timeline
Track where the claim sits in the recovery workflow, how many days have elapsed, and whether the auto-approval window or payment deadline is already in play.
Uploaded
Completed stage
131d elapsed • 0d remaining
Analyzed
Completed stage
131d elapsed • 0d remaining
Awaiting OEM
Completed stage
131d elapsed • 0d remaining
Auto-Approved
Completed stage
131d elapsed • 0d remaining
Payment Due
Completed stage
131d elapsed • 0d remaining
Escalation Eligible
Completed stage
131d elapsed • 0d remaining
Resolved
Overdue / escalation ready
131d elapsed • 0d remaining • Overdue
AI Claim Analysis
Estimated Recovery Amount
$875.00
What this claim may still be worth based on current evidence.
Compliance Score
30/100
Higher is cleaner. Lower means more missing support, more friction, or more OEM pushback.
Violations Detected
2
OEM Response Deadline Exceeded • Payment Deadline Exceeded
Missing Items
3
missing_unit_id_photo • damage_signal_without_damage_photo
Deadline Status
Overdue / escalation ready
131 days open in the visible workflow.
Recommended Action
Escalate to State
This is the fastest next move from the current workflow stage.
US dispute readiness
Evidence packet check
Operational preflight for US warranty escalation: packet size, chronology, cross-references, witness checks, source grounding, and backup evidence.
Estimated pack size
21
Proxy count from docs, images, comments, and claim lines. Actual PDF pages still need final preflight.
Evidence packet lane
Compact packet candidate
Small enough for a compact escalation packet, assuming final PDFs stay clean.
Chronology
Ready to order
Visible span: Apr 23, 2026, 3:33 PM to Apr 27, 2026, 11:54 PM.
Indexed evidence
4 docs / 24 images
Use only the strongest evidence in the escalation packet; keep the rest as support material.
Cross-reference base
Available
Line items, comments, or gap flags can be tied back to supporting material.
Witness verification
Human verification required
Any statement or affidavit output must be checked by the witness before use.
AI / citation gate
Manual check required
Escalation material must keep facts, inferences, citations, and source documents separated.
Expert evidence pressure
Not signalled
No expert-evidence trigger is visible from the current image rollup.
Escalation posture
Escalation watch
131 days open in the visible workflow; risk score 0.70.
Claim Summary
Evidence summary
images=59; damage=0; unit=0; parts=0; doc=42; gaps=missing_unit_id_photo,damage_signal_without_damage_photo • Unit 2026 Nucamp • VIN 7M5TD292XTC307174
Path
/home/openclaw/nas/Dropbox/BARV600/Claims Paid AO/78118/WO_78118_JOB_4_2025.11.07_14.22.53.jpeg
Timeline
First seen Apr 23, 2026, 3:33 PM • last seen Apr 27, 2026, 11:54 PM
Evidence flags
missing unit id photo • damage signal without damage photo
Comment Intelligence
Thread depth
6 indexed side comments on this claim.
Latest visible thread signal
Dec 10, 2025, 12:47 PM • processor • paid $1748.82012/5 check #131589
Role mix
Dealer 0 • OEM 0 • Processor 5
Decision cues
Denial signals 0 • info / missing-doc asks 3 • approval signals 0
Best move
Work missing-doc or reply asks first from the thread.
Quick Actions
Back to search results
Run the same search again.
Open focused evidence thread
Jump straight into Dropbox side comments, notes, and support documents.
Open claim explorer
Return to the main recovery queue view.
Open evidence room
See the quick-rule cards first, then open the legal basis only if needed.
Images
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
Claim Lines
cause
FAILED TO BUILD IT CORRCTLY when running the slide room in and out the floor bows Sublet Repairs: 0.00 and tore the wall apart Remedy: REMOVED THE RECLINERS AND TOOK APART THE DINETTE BOOTH I MEASURE AND CUT OUTTHE LOWER BOARD AND DRILLED HOLES INTHE NEW BOARD FOR THE WIRES AND AND DRILLED HOLES FOR THE NEW SCREWS AND RESCESSED THE MOUNTING HOLES . I THEN INSTALLED AND MADE SURE THE SCREWS DID NOT GO THROUGH THE FLOOR. I THEN MEASURED FOR THE CROSS BRACES AND DRILLED POCKET HOLES FOR THE SCREWS AND INSTALLED WITH LIQUID NAILS AND SCREWS I CUT AND IINSTALLED 3 BRACES I ALSO INSTALLED METAL L BRACKETS TO HELP HOLLD TOGETHER. THEN I INSTALLED THE DECORE END PEICE AND INSTALLED SCREWS I LIQUID NAILED IT ALSO AND INSTALLED EXTRA SCREWS . I HAD TO TAKE THE SEAT APART AND THE WIRNG TO GET THE NEW PANEL INSTALLED ON THE INSIDE OF THE BOOTH ONSCE INSTALLED I THEN REINSTALLED THE WIRING I INSTALLED NEW PANELING AND NEW TRIM AROUND THE PANELING AND FLLED ALL THE HOLES WITH PUTTY AND REINSTALLED THE RECLINERS AND AD RAN ROOM IN AND OUT SEVERAL TIMES TO MAKE SUR EVERYTHING HELD PUTTY AND THEN REINSTALLED THE RECLINERS. Part Return Req: No Status: Approved with Modifications Operation Line 2 Flat Rate Code: 22488 FRESH WATER - VACUUM BREAKER - Fault Code: VENDOR REPLACE (Part Return Required) Serial #: Model #: Notes: Problem: WHEN THE BLACK TANK FLUSH IS BEING USED IT LEAKS WATER AND SOME Time Requested: .75 WATER HAS GONE TO THE UNDER BELLY Time Allowed: .75
gap • confidence 0.81
cause
FAILED TO BUILD IT CORRCTLY when running the slide room in and out the floor bows Sublet Repairs: 0.00 and tore the wall apart Remedy: REMOVED THE RECLINERS AND TOOK APART THE DINETTE BOOTH I MEASURE AND CUT OUTTHE LOWER BOARD AND DRILLED HOLES INTHE NEW BOARD FOR THE WIRES AND AND DRILLED HOLES FOR THE NEW SCREWS AND RESCESSED THE MOUNTING HOLES . I THEN INSTALLED AND MADE SURE THE SCREWS DID NOT GO THROUGH THE FLOOR. I THEN MEASURED FOR THE CROSS BRACES AND DRILLED POCKET HOLES FOR THE SCREWS AND INSTALLED WITH LIQUID NAILS AND SCREWS I CUT AND IINSTALLED 3 BRACES I ALSO INSTALLED METAL L BRACKETS TO HELP HOLLD TOGETHER. THEN I INSTALLED THE DECORE END PEICE AND INSTALLED SCREWS I LIQUID NAILED IT ALSO AND INSTALLED EXTRA SCREWS . I HAD TO TAKE THE SEAT APART AND THE WIRNG TO GET THE NEW PANEL INSTALLED ON THE INSIDE OF THE BOOTH ONSCE INSTALLED I THEN REINSTALLED THE WIRING I INSTALLED NEW PANELING AND NEW TRIM AROUND THE PANELING AND FLLED ALL THE HOLES WITH PUTTY AND REINSTALLED THE RECLINERS AND AD RAN ROOM IN AND OUT SEVERAL TIMES TO MAKE SUR EVERYTHING HELD PUTTY AND THEN REINSTALLED THE RECLINERS. Part Return Req: No Status: Approved with Modifications Operation Line 2 Flat Rate Code: 22488 FRESH WATER - VACUUM BREAKER - Fault Code: VENDOR REPLACE (Part Return Required) Serial #: Model #: Notes: Problem: WHEN THE BLACK TANK FLUSH IS BEING USED IT LEAKS WATER AND SOME Time Requested: .75 WATER HAS GONE TO THE UNDER BELLY Time Allowed: .75
unreviewed • confidence 0.00
cause
FAILED TO BUILD IT CORRCTLY when running the slide room in and out the floor bows Sublet Repairs: 0.00 and tore the wall apart Remedy: REMOVED THE RECLINERS AND TOOK APART THE DINETTE BOOTH I MEASURE AND CUT OUTTHE LOWER BOARD AND DRILLED HOLES INTHE NEW BOARD FOR THE WIRES AND AND DRILLED HOLES FOR THE NEW SCREWS AND RESCESSED THE MOUNTING HOLES . I THEN INSTALLED AND MADE SURE THE SCREWS DID NOT GO THROUGH THE FLOOR. I THEN MEASURED FOR THE CROSS BRACES AND DRILLED POCKET HOLES FOR THE SCREWS AND INSTALLED WITH LIQUID NAILS AND SCREWS I CUT AND IINSTALLED 3 BRACES I ALSO INSTALLED METAL L BRACKETS TO HELP HOLLD TOGETHER. THEN I INSTALLED THE DECORE END PEICE AND INSTALLED SCREWS I LIQUID NAILED IT ALSO AND INSTALLED EXTRA SCREWS . I HAD TO TAKE THE SEAT APART AND THE WIRNG TO GET THE NEW PANEL INSTALLED ON THE INSIDE OF THE BOOTH ONSCE INSTALLED I THEN REINSTALLED THE WIRING I INSTALLED NEW PANELING AND NEW TRIM AROUND THE PANELING AND FLLED ALL THE HOLES WITH PUTTY AND REINSTALLED THE RECLINERS AND AD RAN ROOM IN AND OUT SEVERAL TIMES TO MAKE SUR EVERYTHING HELD PUTTY AND THEN REINSTALLED THE RECLINERS. Part Return Req: No Status: Approved with Modifications Operation Line 2 Flat Rate Code: 22488 FRESH WATER - VACUUM BREAKER - Fault Code: VENDOR REPLACE (Part Return Required) Serial #: Model #: Notes: Problem: WHEN THE BLACK TANK FLUSH IS BEING USED IT LEAKS WATER AND SOME Time Requested: .75 WATER HAS GONE TO THE UNDER BELLY Time Allowed: .75
unreviewed • confidence 0.00
cause
FAILED TO BUILD IT CORRCTLY when running the slide room in and out the floor bows Sublet Repairs: 0.00 and tore the wall apart Remedy: REMOVED THE RECLINERS AND TOOK APART THE DINETTE BOOTH I MEASURE AND CUT OUTTHE LOWER BOARD AND DRILLED HOLES INTHE NEW BOARD FOR THE WIRES AND AND DRILLED HOLES FOR THE NEW SCREWS AND RESCESSED THE MOUNTING HOLES . I THEN INSTALLED AND MADE SURE THE SCREWS DID NOT GO THROUGH THE FLOOR. I THEN MEASURED FOR THE CROSS BRACES AND DRILLED POCKET HOLES FOR THE SCREWS AND INSTALLED WITH LIQUID NAILS AND SCREWS I CUT AND IINSTALLED 3 BRACES I ALSO INSTALLED METAL L BRACKETS TO HELP HOLLD TOGETHER. THEN I INSTALLED THE DECORE END PEICE AND INSTALLED SCREWS I LIQUID NAILED IT ALSO AND INSTALLED EXTRA SCREWS . I HAD TO TAKE THE SEAT APART AND THE WIRNG TO GET THE NEW PANEL INSTALLED ON THE INSIDE OF THE BOOTH ONSCE INSTALLED I THEN REINSTALLED THE WIRING I INSTALLED NEW PANELING AND NEW TRIM AROUND THE PANELING AND FLLED ALL THE HOLES WITH PUTTY AND REINSTALLED THE RECLINERS AND AD RAN ROOM IN AND OUT SEVERAL TIMES TO MAKE SUR EVERYTHING HELD PUTTY AND THEN REINSTALLED THE RECLINERS. Part Return Req: No Status: Approved with Modifications Operation Line 2 Flat Rate Code: 22488 FRESH WATER - VACUUM BREAKER - Fault Code: VENDOR REPLACE (Part Return Required) Serial #: Model #: Notes: Problem: WHEN THE BLACK TANK FLUSH IS BEING USED IT LEAKS WATER AND SOME Time Requested: .75 WATER HAS GONE TO THE UNDER BELLY Time Allowed: .75
unreviewed • confidence 0.00
cause
FAILED TO BUILD IT CORRCTLY when running the slide room in and out the floor bows Sublet Repairs: 0.00 and tore the wall apart Remedy: REMOVED THE RECLINERS AND TOOK APART THE DINETTE BOOTH I MEASURE AND CUT OUTTHE LOWER BOARD AND DRILLED HOLES INTHE NEW BOARD FOR THE WIRES AND AND DRILLED HOLES FOR THE NEW SCREWS AND RESCESSED THE MOUNTING HOLES . I THEN INSTALLED AND MADE SURE THE SCREWS DID NOT GO THROUGH THE FLOOR. I THEN MEASURED FOR THE CROSS BRACES AND DRILLED POCKET HOLES FOR THE SCREWS AND INSTALLED WITH LIQUID NAILS AND SCREWS I CUT AND IINSTALLED 3 BRACES I ALSO INSTALLED METAL L BRACKETS TO HELP HOLLD TOGETHER. THEN I INSTALLED THE DECORE END PEICE AND INSTALLED SCREWS I LIQUID NAILED IT ALSO AND INSTALLED EXTRA SCREWS . I HAD TO TAKE THE SEAT APART AND THE WIRNG TO GET THE NEW PANEL INSTALLED ON THE INSIDE OF THE BOOTH ONSCE INSTALLED I THEN REINSTALLED THE WIRING I INSTALLED NEW PANELING AND NEW TRIM AROUND THE PANELING AND FLLED ALL THE HOLES WITH PUTTY AND REINSTALLED THE RECLINERS AND AD RAN ROOM IN AND OUT SEVERAL TIMES TO MAKE SUR EVERYTHING HELD PUTTY AND THEN REINSTALLED THE RECLINERS. Part Return Req: No Status: Approved with Modifications Operation Line 2 Flat Rate Code: 22488 FRESH WATER - VACUUM BREAKER - Fault Code: VENDOR REPLACE (Part Return Required) Serial #: Model #: Notes: Problem: WHEN THE BLACK TANK FLUSH IS BEING USED IT LEAKS WATER AND SOME Time Requested: .75 WATER HAS GONE TO THE UNDER BELLY Time Allowed: .75
unreviewed • confidence 0.00
cause
traced down under the unit in the underbelly the leak i then noticed it was coming from Sublet Repairs: 0.00 above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Remedy: traced down under the unit in the underbelly the leak i then noticed it was coming from above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Part Return Req: Yes Status: Approved Operation Line 3 Flat Rate Code: 22718 UNDERBELLY - REPAIR Fault Code: GOODWILL DEALER Serial #: Model #: Notes: 11/24 bh added more photos approved 2 hrs for line 3 10/31/2025 Paul- There are no images attached. at .2. I will good will for dealer 11-10 PHOTOS ADDED Problem: UNDERBELLY WAS FILLED WITH WATER WHEN CUSTOMER DROVE AWAY FROM Time Requested: 2.1 THERE LOCATION THE CAMPER HAD BEEN FOR OVER A WEEK. INSPECT WHERE WATER Time Allowed: 1 MAY HAVE ENTERED THE UNDERBELLY AND VERIFY UNDERBELLY IS OK Sublet Repairs: 0.00
gap • confidence 0.95
cause
traced down under the unit in the underbelly the leak i then noticed it was coming from Sublet Repairs: 0.00 above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Remedy: traced down under the unit in the underbelly the leak i then noticed it was coming from above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Part Return Req: Yes Status: Approved Operation Line 3 Flat Rate Code: 22718 UNDERBELLY - REPAIR Fault Code: GOODWILL DEALER Serial #: Model #: Notes: 11/24 bh added more photos approved 2 hrs for line 3 10/31/2025 Paul- There are no images attached. at .2. I will good will for dealer 11-10 PHOTOS ADDED Problem: UNDERBELLY WAS FILLED WITH WATER WHEN CUSTOMER DROVE AWAY FROM Time Requested: 2.1 THERE LOCATION THE CAMPER HAD BEEN FOR OVER A WEEK. INSPECT WHERE WATER Time Allowed: 1 MAY HAVE ENTERED THE UNDERBELLY AND VERIFY UNDERBELLY IS OK Sublet Repairs: 0.00
unreviewed • confidence 0.00
cause
traced down under the unit in the underbelly the leak i then noticed it was coming from Sublet Repairs: 0.00 above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Remedy: traced down under the unit in the underbelly the leak i then noticed it was coming from above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Part Return Req: Yes Status: Approved Operation Line 3 Flat Rate Code: 22718 UNDERBELLY - REPAIR Fault Code: GOODWILL DEALER Serial #: Model #: Notes: 11/24 bh added more photos approved 2 hrs for line 3 10/31/2025 Paul- There are no images attached. at .2. I will good will for dealer 11-10 PHOTOS ADDED Problem: UNDERBELLY WAS FILLED WITH WATER WHEN CUSTOMER DROVE AWAY FROM Time Requested: 2.1 THERE LOCATION THE CAMPER HAD BEEN FOR OVER A WEEK. INSPECT WHERE WATER Time Allowed: 1 MAY HAVE ENTERED THE UNDERBELLY AND VERIFY UNDERBELLY IS OK Sublet Repairs: 0.00
unreviewed • confidence 0.00
cause
traced down under the unit in the underbelly the leak i then noticed it was coming from Sublet Repairs: 0.00 above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Remedy: traced down under the unit in the underbelly the leak i then noticed it was coming from above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Part Return Req: Yes Status: Approved Operation Line 3 Flat Rate Code: 22718 UNDERBELLY - REPAIR Fault Code: GOODWILL DEALER Serial #: Model #: Notes: 11/24 bh added more photos approved 2 hrs for line 3 10/31/2025 Paul- There are no images attached. at .2. I will good will for dealer 11-10 PHOTOS ADDED Problem: UNDERBELLY WAS FILLED WITH WATER WHEN CUSTOMER DROVE AWAY FROM Time Requested: 2.1 THERE LOCATION THE CAMPER HAD BEEN FOR OVER A WEEK. INSPECT WHERE WATER Time Allowed: 1 MAY HAVE ENTERED THE UNDERBELLY AND VERIFY UNDERBELLY IS OK Sublet Repairs: 0.00
unreviewed • confidence 0.00
cause
traced down under the unit in the underbelly the leak i then noticed it was coming from Sublet Repairs: 0.00 above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Remedy: traced down under the unit in the underbelly the leak i then noticed it was coming from above the tank i then found under the sink the check vlave had bugs init and was leaking badly i cleaned out the bugs and put a screen over the top of the vlave and then i had to cove r the access holes in the underbelly and sealed them with silicone. Part Return Req: Yes Status: Approved Operation Line 3 Flat Rate Code: 22718 UNDERBELLY - REPAIR Fault Code: GOODWILL DEALER Serial #: Model #: Notes: 11/24 bh added more photos approved 2 hrs for line 3 10/31/2025 Paul- There are no images attached. at .2. I will good will for dealer 11-10 PHOTOS ADDED Problem: UNDERBELLY WAS FILLED WITH WATER WHEN CUSTOMER DROVE AWAY FROM Time Requested: 2.1 THERE LOCATION THE CAMPER HAD BEEN FOR OVER A WEEK. INSPECT WHERE WATER Time Allowed: 1 MAY HAVE ENTERED THE UNDERBELLY AND VERIFY UNDERBELLY IS OK Sublet Repairs: 0.00
unreviewed • confidence 0.00
cause
.removed and inspected and found no issues and put back together. Remedy: .removed and inspected and found no issues and put back together. Part Return Req: No Status: Approved with Modifications Operation Line 4 Flat Rate Code: 22688 SCISSOR JACK - REPLACE (Photos Required) Fault Code: VENDOR (Photo of tag required) Serial #: Model #: Notes: Problem: REAR LEFT STABILIZER IS BENT Time Requested: .5
gap • confidence 0.75
cause
.removed and inspected and found no issues and put back together. Remedy: .removed and inspected and found no issues and put back together. Part Return Req: No Status: Approved with Modifications Operation Line 4 Flat Rate Code: 22688 SCISSOR JACK - REPLACE (Photos Required) Fault Code: VENDOR (Photo of tag required) Serial #: Model #: Notes: Problem: REAR LEFT STABILIZER IS BENT Time Requested: .5
unreviewed • confidence 0.00
cause
.removed and inspected and found no issues and put back together. Remedy: .removed and inspected and found no issues and put back together. Part Return Req: No Status: Approved with Modifications Operation Line 4 Flat Rate Code: 22688 SCISSOR JACK - REPLACE (Photos Required) Fault Code: VENDOR (Photo of tag required) Serial #: Model #: Notes: Problem: REAR LEFT STABILIZER IS BENT Time Requested: .5
unreviewed • confidence 0.00
cause
.removed and inspected and found no issues and put back together. Remedy: .removed and inspected and found no issues and put back together. Part Return Req: No Status: Approved with Modifications Operation Line 4 Flat Rate Code: 22688 SCISSOR JACK - REPLACE (Photos Required) Fault Code: VENDOR (Photo of tag required) Serial #: Model #: Notes: Problem: REAR LEFT STABILIZER IS BENT Time Requested: .5
unreviewed • confidence 0.00
cause
.removed and inspected and found no issues and put back together. Remedy: .removed and inspected and found no issues and put back together. Part Return Req: No Status: Approved with Modifications Operation Line 4 Flat Rate Code: 22688 SCISSOR JACK - REPLACE (Photos Required) Fault Code: VENDOR (Photo of tag required) Serial #: Model #: Notes: Problem: REAR LEFT STABILIZER IS BENT Time Requested: .5
unreviewed • confidence 0.00
cause
Turned in request for parts Time Allowed: .5 Remedy: take jack off and install new Sublet Repairs: 0.00 Part Return Req: No Status: Approved
partial-match • confidence 0.75
cause
Turned in request for parts Time Allowed: .5 Remedy: take jack off and install new Sublet Repairs: 0.00 Part Return Req: No Status: Approved
unreviewed • confidence 0.00
cause
Turned in request for parts Time Allowed: .5 Remedy: take jack off and install new Sublet Repairs: 0.00 Part Return Req: No Status: Approved
unreviewed • confidence 0.00
cause
Turned in request for parts Time Allowed: .5 Remedy: take jack off and install new Sublet Repairs: 0.00 Part Return Req: No Status: Approved
unreviewed • confidence 0.00
cause
Turned in request for parts Time Allowed: .5 Remedy: take jack off and install new Sublet Repairs: 0.00 Part Return Req: No Status: Approved
unreviewed • confidence 0.00
Evidence Thread
Ashlee Olsen
processor • Dec 3, 2025, 11:34 AM
submitted C#98735
Ashlee Olsen
processor • Dec 3, 2025, 12:45 PM
@Ben H @Matt B WO 78118 Alliance feedback: We will need an invoice for the parts, this wasn't ordered under this VIN. Thank you!
Ashlee Olsen
processor • Dec 3, 2025, 12:48 PM
Sorry, this is for job 5
Ben Hoffman
dealer_or_external • Dec 3, 2025, 1:02 PM
@Ashlee O we found it and added it
Ashlee Olsen
processor • Dec 3, 2025, 1:54 PM
Thanks guys! Invoice added to Alliance claim
Ashlee Olsen
processor • Dec 10, 2025, 12:47 PM
paid $1748.82012/5 check #131589
Claim Files
INVOICE FOR JACK.pdf
pdf • Dec 3, 2025, 1:01 PM • 97,396 bytes
/home/openclaw/nas/Dropbox/BARV600/Claims Paid AO/78118/INVOICE FOR JACK.pdf
CLAIM.pdf
main-pdf • Dec 3, 2025, 10:24 AM • 975,072 bytes
/home/openclaw/nas/Dropbox/BARV600/Claims Paid AO/78118/CLAIM.pdf
RO 78118.pdf
pdf • Dec 3, 2025, 10:23 AM • 1,157,025 bytes
/home/openclaw/nas/Dropbox/BARV600/Claims Paid AO/78118/RO 78118.pdf
PREAUTH.pdf
main-pdf • Dec 3, 2025, 10:20 AM • 14,482 bytes
/home/openclaw/nas/Dropbox/BARV600/Claims Paid AO/78118/PREAUTH.pdf