Claim explorer / evidence thread
Claim 73133
MYRV 12024 • Stephanie • Paid • open-range
risk 0.70
deadline Overdue / escalation ready
images 23
matched 4
Warranty deadline timeline
Track where the claim sits in the recovery workflow, how many days have elapsed, and whether the auto-approval window or payment deadline is already in play.
Uploaded
Completed stage
58d elapsed • 0d remaining
Analyzed
Completed stage
58d elapsed • 0d remaining
Awaiting OEM
Completed stage
58d elapsed • 0d remaining
Auto-Approved
Completed stage
58d elapsed • 0d remaining
Payment Due
Completed stage
58d elapsed • 0d remaining
Escalation Eligible
Completed stage
58d elapsed • 0d remaining
Resolved
Overdue / escalation ready
58d elapsed • 0d remaining • Overdue
AI Claim Analysis
Estimated Recovery Amount
$3,250.00
What this claim may still be worth based on current evidence.
Compliance Score
30/100
Higher is cleaner. Lower means more missing support, more friction, or more OEM pushback.
Violations Detected
2
OEM Response Deadline Exceeded • Payment Deadline Exceeded
Missing Items
0
missing_unit_id_photo • damage_signal_without_damage_photo
Deadline Status
Overdue / escalation ready
58 days open in the visible workflow.
Recommended Action
Escalate to State
This is the fastest next move from the current workflow stage.
US dispute readiness
Evidence packet check
Operational preflight for US warranty escalation: packet size, chronology, cross-references, witness checks, source grounding, and backup evidence.
Estimated pack size
37
Proxy count from docs, images, comments, and claim lines. Actual PDF pages still need final preflight.
Evidence packet lane
Full evidence packet
Estimated packet is large. Prepare a concise executive chronology with full backup evidence separated.
Chronology
Ready to order
Visible span: May 7, 2026, 5:05 AM to Jun 25, 2026, 2:54 AM.
Indexed evidence
8 docs / 24 images
Use only the strongest evidence in the escalation packet; keep the rest as support material.
Cross-reference base
Available
Line items, comments, or gap flags can be tied back to supporting material.
Witness verification
Human verification required
Any statement or affidavit output must be checked by the witness before use.
AI / citation gate
Manual check required
Escalation material must keep facts, inferences, citations, and source documents separated.
Expert evidence pressure
Not signalled
No expert-evidence trigger is visible from the current image rollup.
Escalation posture
Escalation watch
58 days open in the visible workflow; risk score 0.70.
Claim Summary
Evidence summary
images=23; damage=0; unit=0; parts=0; doc=23; gaps=missing_unit_id_photo,damage_signal_without_damage_photo • Unit 2025 Open Range • VIN 58TCM0BS2S3B53091
Path
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/April 2026/Open Range/73133/Paid claim.pdf
Timeline
First seen May 7, 2026, 5:05 AM • last seen Jun 25, 2026, 2:54 AM
Evidence flags
missing unit id photo • damage signal without damage photo
Comment Intelligence
Thread depth
5 indexed side comments on this claim.
Latest visible thread signal
Apr 6, 2026, 2:43 PM • processor • Submitted all lines for payment
Role mix
Dealer 0 • OEM 0 • Processor 4
Decision cues
Denial signals 0 • info / missing-doc asks 4 • approval signals 5
Best move
Work missing-doc or reply asks first from the thread.
Quick Actions
Back to search results
Run the same search again.
Open focused evidence thread
Jump straight into Dropbox side comments, notes, and support documents.
Open claim explorer
Return to the main recovery queue view.
Open evidence room
See the quick-rule cards first, then open the legal basis only if needed.
Images
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
document-photo
Claim Lines
complaint
STOVE/OVEN INOPERATIVE
partial-match • confidence 0.63
complaint
STOVE/OVEN INOPERATIVE
unreviewed • confidence 0.00
complaint
STOVE/OVEN INOPERATIVE
unreviewed • confidence 0.00
complaint
STOVE/OVEN INOPERATIVE
unreviewed • confidence 0.00
complaint
STOVE/OVEN INOPERATIVE
unreviewed • confidence 0.00
cause
Disconnected wire at control board in the basement
partial-match • confidence 0.63
cause
Disconnected wire at control board in the basement
unreviewed • confidence 0.00
cause
Disconnected wire at control board in the basement
unreviewed • confidence 0.00
cause
Disconnected wire at control board in the basement
unreviewed • confidence 0.00
cause
Disconnected wire at control board in the basement
unreviewed • confidence 0.00
correction
Found the stove oven had no power not allowing burners to light Tracked the wiring from behind the stove to the basement Opened the access panel in the basement for the control boards Located the wiring for the stove and found the power side was disconnected Using a volt meter found the connector for he stove Reconnected the wire *1000* Tested the stove and oven all components are now working .80HRS Labor Job # Description Total 1 STOVE\/OVEN 143.20 Subtotal for Job #1: 143.20 Job #2 - Internal
partial-match • confidence 0.71
correction
Found the stove oven had no power not allowing burners to light Tracked the wiring from behind the stove to the basement Opened the access panel in the basement for the control boards Located the wiring for the stove and found the power side was disconnected Using a volt meter found the connector for he stove Reconnected the wire *1000* Tested the stove and oven all components are now working .80HRS Labor Job # Description Total 1 STOVE\/OVEN 143.20 Subtotal for Job #1: 143.20 Job #2 - Internal
unreviewed • confidence 0.00
correction
Found the stove oven had no power not allowing burners to light Tracked the wiring from behind the stove to the basement Opened the access panel in the basement for the control boards Located the wiring for the stove and found the power side was disconnected Using a volt meter found the connector for he stove Reconnected the wire *1000* Tested the stove and oven all components are now working .80HRS Labor Job # Description Total 1 STOVE\/OVEN 143.20 Subtotal for Job #1: 143.20 Job #2 - Internal
unreviewed • confidence 0.00
correction
Found the stove oven had no power not allowing burners to light Tracked the wiring from behind the stove to the basement Opened the access panel in the basement for the control boards Located the wiring for the stove and found the power side was disconnected Using a volt meter found the connector for he stove Reconnected the wire *1000* Tested the stove and oven all components are now working .80HRS Labor Job # Description Total 1 STOVE\/OVEN 143.20 Subtotal for Job #1: 143.20 Job #2 - Internal
unreviewed • confidence 0.00
correction
Found the stove oven had no power not allowing burners to light Tracked the wiring from behind the stove to the basement Opened the access panel in the basement for the control boards Located the wiring for the stove and found the power side was disconnected Using a volt meter found the connector for he stove Reconnected the wire *1000* Tested the stove and oven all components are now working .80HRS Labor Job # Description Total 1 STOVE\/OVEN 143.20 Subtotal for Job #1: 143.20 Job #2 - Internal
unreviewed • confidence 0.00
complaint
WATER HEATER DISCONNECTED / FILTER BROKEN AT TRUMA
partial-match • confidence 0.73
complaint
WATER HEATER DISCONNECTED / FILTER BROKEN AT TRUMA
unreviewed • confidence 0.00
complaint
WATER HEATER DISCONNECTED / FILTER BROKEN AT TRUMA
unreviewed • confidence 0.00
complaint
WATER HEATER DISCONNECTED / FILTER BROKEN AT TRUMA
unreviewed • confidence 0.00
complaint
WATER HEATER DISCONNECTED / FILTER BROKEN AT TRUMA
unreviewed • confidence 0.00
cause
Found the water heater water lines were disconnected from the back of the water Found the refrigerator water filter was full of antifreeze Found the filter for the trauma aqua go was broken
matched • confidence 0.81
cause
Found the water heater water lines were disconnected from the back of the water Found the refrigerator water filter was full of antifreeze Found the filter for the trauma aqua go was broken
unreviewed • confidence 0.00
cause
Found the water heater water lines were disconnected from the back of the water Found the refrigerator water filter was full of antifreeze Found the filter for the trauma aqua go was broken
unreviewed • confidence 0.00
cause
Found the water heater water lines were disconnected from the back of the water Found the refrigerator water filter was full of antifreeze Found the filter for the trauma aqua go was broken
unreviewed • confidence 0.00
cause
Found the water heater water lines were disconnected from the back of the water Found the refrigerator water filter was full of antifreeze Found the filter for the trauma aqua go was broken
unreviewed • confidence 0.00
correction
Reconnected the water lines to he back of the water heater Found the filter for the water heater in the battery compartment Installed the filter in the water heater Turned the pump on to fill the water heater Found water flowing out of the filter Turned pump off Found a stock unit with the same trauma system taken from 28551
matched • confidence 0.81
correction
Reconnected the water lines to he back of the water heater Found the filter for the water heater in the battery compartment Installed the filter in the water heater Turned the pump on to fill the water heater Found water flowing out of the filter Turned pump off Found a stock unit with the same trauma system taken from 28551
unreviewed • confidence 0.00
correction
Reconnected the water lines to he back of the water heater Found the filter for the water heater in the battery compartment Installed the filter in the water heater Turned the pump on to fill the water heater Found water flowing out of the filter Turned pump off Found a stock unit with the same trauma system taken from 28551
unreviewed • confidence 0.00
correction
Reconnected the water lines to he back of the water heater Found the filter for the water heater in the battery compartment Installed the filter in the water heater Turned the pump on to fill the water heater Found water flowing out of the filter Turned pump off Found a stock unit with the same trauma system taken from 28551
unreviewed • confidence 0.00
correction
Reconnected the water lines to he back of the water heater Found the filter for the water heater in the battery compartment Installed the filter in the water heater Turned the pump on to fill the water heater Found water flowing out of the filter Turned pump off Found a stock unit with the same trauma system taken from 28551
unreviewed • confidence 0.00
complaint
DRAWER IN KITCHEN MISSING GUIDES *73133*
partial-match • confidence 0.67
complaint
DRAWER IN KITCHEN MISSING GUIDES *73133*
unreviewed • confidence 0.00
complaint
DRAWER IN KITCHEN MISSING GUIDES *73133*
unreviewed • confidence 0.00
complaint
DRAWER IN KITCHEN MISSING GUIDES *73133*
unreviewed • confidence 0.00
complaint
DRAWER IN KITCHEN MISSING GUIDES *73133*
unreviewed • confidence 0.00
cause
Drawer guides missing
partial-match • confidence 0.67
cause
Drawer guides missing
unreviewed • confidence 0.00
cause
Drawer guides missing
unreviewed • confidence 0.00
cause
Drawer guides missing
unreviewed • confidence 0.00
cause
Drawer guides missing
unreviewed • confidence 0.00
correction
Installed new drawer guides Verified drawer operation Works correctly Work complete Labor Job # Description Total 3 DRAWER N/C Parts Part # Description Qty Price Total 16092 18" DRAWER SLIDE (SET OF 2) 1.00 N/C N/C Subtotal for Job #3: 0.00 INC., MYERS "RV" CENTER, Customer #: 1000 Job #4 - Internal
partial-match • confidence 0.75
correction
Installed new drawer guides Verified drawer operation Works correctly Work complete Labor Job # Description Total 3 DRAWER N/C Parts Part # Description Qty Price Total 16092 18" DRAWER SLIDE (SET OF 2) 1.00 N/C N/C Subtotal for Job #3: 0.00 INC., MYERS "RV" CENTER, Customer #: 1000 Job #4 - Internal
unreviewed • confidence 0.00
correction
Installed new drawer guides Verified drawer operation Works correctly Work complete Labor Job # Description Total 3 DRAWER N/C Parts Part # Description Qty Price Total 16092 18" DRAWER SLIDE (SET OF 2) 1.00 N/C N/C Subtotal for Job #3: 0.00 INC., MYERS "RV" CENTER, Customer #: 1000 Job #4 - Internal
unreviewed • confidence 0.00
correction
Installed new drawer guides Verified drawer operation Works correctly Work complete Labor Job # Description Total 3 DRAWER N/C Parts Part # Description Qty Price Total 16092 18" DRAWER SLIDE (SET OF 2) 1.00 N/C N/C Subtotal for Job #3: 0.00 INC., MYERS "RV" CENTER, Customer #: 1000 Job #4 - Internal
unreviewed • confidence 0.00
correction
Installed new drawer guides Verified drawer operation Works correctly Work complete Labor Job # Description Total 3 DRAWER N/C Parts Part # Description Qty Price Total 16092 18" DRAWER SLIDE (SET OF 2) 1.00 N/C N/C Subtotal for Job #3: 0.00 INC., MYERS "RV" CENTER, Customer #: 1000 Job #4 - Internal
unreviewed • confidence 0.00
complaint
UNIT MISSING 50AM POWER CORD
partial-match • confidence 0.67
complaint
UNIT MISSING 50AM POWER CORD
unreviewed • confidence 0.00
complaint
UNIT MISSING 50AM POWER CORD
unreviewed • confidence 0.00
complaint
UNIT MISSING 50AM POWER CORD
unreviewed • confidence 0.00
complaint
UNIT MISSING 50AM POWER CORD
unreviewed • confidence 0.00
cause
Power cord missing
partial-match • confidence 0.67
cause
Power cord missing
unreviewed • confidence 0.00
cause
Power cord missing
unreviewed • confidence 0.00
cause
Power cord missing
unreviewed • confidence 0.00
cause
Power cord missing
unreviewed • confidence 0.00
correction
Replaced power with new reference 73103 Labor Job # Description Total 4 INSTALL CORD N/C Subtotal for Job #4: 0.00 *1000* Job #5 - Internal
partial-match • confidence 0.71
correction
Replaced power with new reference 73103 Labor Job # Description Total 4 INSTALL CORD N/C Subtotal for Job #4: 0.00 *1000* Job #5 - Internal
unreviewed • confidence 0.00
correction
Replaced power with new reference 73103 Labor Job # Description Total 4 INSTALL CORD N/C Subtotal for Job #4: 0.00 *1000* Job #5 - Internal
unreviewed • confidence 0.00
correction
Replaced power with new reference 73103 Labor Job # Description Total 4 INSTALL CORD N/C Subtotal for Job #4: 0.00 *1000* Job #5 - Internal
unreviewed • confidence 0.00
correction
Replaced power with new reference 73103 Labor Job # Description Total 4 INSTALL CORD N/C Subtotal for Job #4: 0.00 *1000* Job #5 - Internal
unreviewed • confidence 0.00
complaint
Transferred to RV*73133A on 03 APR 26 Estimate amount was 0.00 DAMAGED EXTERIOR KITCHEN COMPARTMENT DOOR
partial-match • confidence 0.63
complaint
Transferred to RV*73133A on 03 APR 26 Estimate amount was 0.00 DAMAGED EXTERIOR KITCHEN COMPARTMENT DOOR
unreviewed • confidence 0.00
complaint
Transferred to RV*73133A on 03 APR 26 Estimate amount was 0.00 DAMAGED EXTERIOR KITCHEN COMPARTMENT DOOR
unreviewed • confidence 0.00
complaint
Transferred to RV*73133A on 03 APR 26 Estimate amount was 0.00 DAMAGED EXTERIOR KITCHEN COMPARTMENT DOOR
unreviewed • confidence 0.00
complaint
Transferred to RV*73133A on 03 APR 26 Estimate amount was 0.00 DAMAGED EXTERIOR KITCHEN COMPARTMENT DOOR
unreviewed • confidence 0.00
cause
Open door while slide was extending struck the building
partial-match • confidence 0.63
cause
Open door while slide was extending struck the building
unreviewed • confidence 0.00
cause
Open door while slide was extending struck the building
unreviewed • confidence 0.00
cause
Open door while slide was extending struck the building
unreviewed • confidence 0.00
cause
Open door while slide was extending struck the building
unreviewed • confidence 0.00
correction
During the sfd the outdoor kitchen door was open Extending the slide the door struck the building causing heavy damage to the door The door was removed straightened and squared so that it will open and close the damaged edge was sealed with silicone and additional rivets added inside to hold the door together Pictures attached to the sfd Door needs to be replaced along with the decals Job on hold for parts Labor Job # Description Total 5 COMPARTMENT DOOR N/C
matched • confidence 0.85
correction
During the sfd the outdoor kitchen door was open Extending the slide the door struck the building causing heavy damage to the door The door was removed straightened and squared so that it will open and close the damaged edge was sealed with silicone and additional rivets added inside to hold the door together Pictures attached to the sfd Door needs to be replaced along with the decals Job on hold for parts Labor Job # Description Total 5 COMPARTMENT DOOR N/C
unreviewed • confidence 0.00
correction
During the sfd the outdoor kitchen door was open Extending the slide the door struck the building causing heavy damage to the door The door was removed straightened and squared so that it will open and close the damaged edge was sealed with silicone and additional rivets added inside to hold the door together Pictures attached to the sfd Door needs to be replaced along with the decals Job on hold for parts Labor Job # Description Total 5 COMPARTMENT DOOR N/C
unreviewed • confidence 0.00
correction
During the sfd the outdoor kitchen door was open Extending the slide the door struck the building causing heavy damage to the door The door was removed straightened and squared so that it will open and close the damaged edge was sealed with silicone and additional rivets added inside to hold the door together Pictures attached to the sfd Door needs to be replaced along with the decals Job on hold for parts Labor Job # Description Total 5 COMPARTMENT DOOR N/C
unreviewed • confidence 0.00
correction
During the sfd the outdoor kitchen door was open Extending the slide the door struck the building causing heavy damage to the door The door was removed straightened and squared so that it will open and close the damaged edge was sealed with silicone and additional rivets added inside to hold the door together Pictures attached to the sfd Door needs to be replaced along with the decals Job on hold for parts Labor Job # Description Total 5 COMPARTMENT DOOR N/C
unreviewed • confidence 0.00
complaint
BEDROOM (BARN) DOORS LATCH INOP
partial-match • confidence 0.63
complaint
BEDROOM (BARN) DOORS LATCH INOP
unreviewed • confidence 0.00
complaint
BEDROOM (BARN) DOORS LATCH INOP
unreviewed • confidence 0.00
complaint
BEDROOM (BARN) DOORS LATCH INOP
unreviewed • confidence 0.00
complaint
BEDROOM (BARN) DOORS LATCH INOP
unreviewed • confidence 0.00
cause
Latch pulled out of keeper
partial-match • confidence 0.63
cause
Latch pulled out of keeper
unreviewed • confidence 0.00
cause
Latch pulled out of keeper
unreviewed • confidence 0.00
cause
Latch pulled out of keeper
unreviewed • confidence 0.00
cause
Latch pulled out of keeper
unreviewed • confidence 0.00
correction
Removed knob from the door placed the elastic band back inside and reattached the knob .10HRS Labor Job # Description Total 6 DOOR LATCH 17.90 *73133* Subtotal for Job #6: 17.90 Job #7 - Warranty
partial-match • confidence 0.71
correction
Removed knob from the door placed the elastic band back inside and reattached the knob .10HRS Labor Job # Description Total 6 DOOR LATCH 17.90 *73133* Subtotal for Job #6: 17.90 Job #7 - Warranty
unreviewed • confidence 0.00
correction
Removed knob from the door placed the elastic band back inside and reattached the knob .10HRS Labor Job # Description Total 6 DOOR LATCH 17.90 *73133* Subtotal for Job #6: 17.90 Job #7 - Warranty
unreviewed • confidence 0.00
correction
Removed knob from the door placed the elastic band back inside and reattached the knob .10HRS Labor Job # Description Total 6 DOOR LATCH 17.90 *73133* Subtotal for Job #6: 17.90 Job #7 - Warranty
unreviewed • confidence 0.00
correction
Removed knob from the door placed the elastic band back inside and reattached the knob .10HRS Labor Job # Description Total 6 DOOR LATCH 17.90 *73133* Subtotal for Job #6: 17.90 Job #7 - Warranty
unreviewed • confidence 0.00
complaint
REFER NOT INSTALLED STRAIGHT
partial-match • confidence 0.63
complaint
REFER NOT INSTALLED STRAIGHT
unreviewed • confidence 0.00
complaint
REFER NOT INSTALLED STRAIGHT
unreviewed • confidence 0.00
complaint
REFER NOT INSTALLED STRAIGHT
unreviewed • confidence 0.00
complaint
REFER NOT INSTALLED STRAIGHT
unreviewed • confidence 0.00
cause
NOT STRAIGHT AND LOOSE
partial-match • confidence 0.63
cause
NOT STRAIGHT AND LOOSE
unreviewed • confidence 0.00
cause
NOT STRAIGHT AND LOOSE
unreviewed • confidence 0.00
cause
NOT STRAIGHT AND LOOSE
unreviewed • confidence 0.00
cause
NOT STRAIGHT AND LOOSE
unreviewed • confidence 0.00
correction
Found the refrigerator was not in the cabinet square. the bottom was sticking out more than an inch further than top Found the refrigerator only has rollers on all four corners and the rear is not adjustable Removed the plastic grill from the front bottom and found the adjustment screws Lowered the front rollers until the refrigerator was much more plumb in the cabinet Also found the refrigerator was secured in the cabinet at all and was free to move in and out Found shop supplies metal angle shelf supports that fit at the front base that could be attached to the floor to prevent the refrigerator from rolling forward The angles were attached the refrigerator is now secure 1.25hrs INC., MYERS "RV" CENTER, Customer #: 1000 Labor Job # Description Total 7 REFER 179.00 Parts Part # Description Qty Price Total 18935 GE REFRIGERATOR WATER FILTER 1.00 64.97 64.97 Subtotal for Job #7: 243.97 Job #8 - Warranty
matched • confidence 0.95
correction
Found the refrigerator was not in the cabinet square. the bottom was sticking out more than an inch further than top Found the refrigerator only has rollers on all four corners and the rear is not adjustable Removed the plastic grill from the front bottom and found the adjustment screws Lowered the front rollers until the refrigerator was much more plumb in the cabinet Also found the refrigerator was secured in the cabinet at all and was free to move in and out Found shop supplies metal angle shelf supports that fit at the front base that could be attached to the floor to prevent the refrigerator from rolling forward The angles were attached the refrigerator is now secure 1.25hrs INC., MYERS "RV" CENTER, Customer #: 1000 Labor Job # Description Total 7 REFER 179.00 Parts Part # Description Qty Price Total 18935 GE REFRIGERATOR WATER FILTER 1.00 64.97 64.97 Subtotal for Job #7: 243.97 Job #8 - Warranty
unreviewed • confidence 0.00
correction
Found the refrigerator was not in the cabinet square. the bottom was sticking out more than an inch further than top Found the refrigerator only has rollers on all four corners and the rear is not adjustable Removed the plastic grill from the front bottom and found the adjustment screws Lowered the front rollers until the refrigerator was much more plumb in the cabinet Also found the refrigerator was secured in the cabinet at all and was free to move in and out Found shop supplies metal angle shelf supports that fit at the front base that could be attached to the floor to prevent the refrigerator from rolling forward The angles were attached the refrigerator is now secure 1.25hrs INC., MYERS "RV" CENTER, Customer #: 1000 Labor Job # Description Total 7 REFER 179.00 Parts Part # Description Qty Price Total 18935 GE REFRIGERATOR WATER FILTER 1.00 64.97 64.97 Subtotal for Job #7: 243.97 Job #8 - Warranty
unreviewed • confidence 0.00
correction
Found the refrigerator was not in the cabinet square. the bottom was sticking out more than an inch further than top Found the refrigerator only has rollers on all four corners and the rear is not adjustable Removed the plastic grill from the front bottom and found the adjustment screws Lowered the front rollers until the refrigerator was much more plumb in the cabinet Also found the refrigerator was secured in the cabinet at all and was free to move in and out Found shop supplies metal angle shelf supports that fit at the front base that could be attached to the floor to prevent the refrigerator from rolling forward The angles were attached the refrigerator is now secure 1.25hrs INC., MYERS "RV" CENTER, Customer #: 1000 Labor Job # Description Total 7 REFER 179.00 Parts Part # Description Qty Price Total 18935 GE REFRIGERATOR WATER FILTER 1.00 64.97 64.97 Subtotal for Job #7: 243.97 Job #8 - Warranty
unreviewed • confidence 0.00
correction
Found the refrigerator was not in the cabinet square. the bottom was sticking out more than an inch further than top Found the refrigerator only has rollers on all four corners and the rear is not adjustable Removed the plastic grill from the front bottom and found the adjustment screws Lowered the front rollers until the refrigerator was much more plumb in the cabinet Also found the refrigerator was secured in the cabinet at all and was free to move in and out Found shop supplies metal angle shelf supports that fit at the front base that could be attached to the floor to prevent the refrigerator from rolling forward The angles were attached the refrigerator is now secure 1.25hrs INC., MYERS "RV" CENTER, Customer #: 1000 Labor Job # Description Total 7 REFER 179.00 Parts Part # Description Qty Price Total 18935 GE REFRIGERATOR WATER FILTER 1.00 64.97 64.97 Subtotal for Job #7: 243.97 Job #8 - Warranty
unreviewed • confidence 0.00
complaint
BRAKE AMPS LOW *1000*
partial-match • confidence 0.63
complaint
BRAKE AMPS LOW *1000*
unreviewed • confidence 0.00
complaint
BRAKE AMPS LOW *1000*
unreviewed • confidence 0.00
complaint
BRAKE AMPS LOW *1000*
unreviewed • confidence 0.00
complaint
BRAKE AMPS LOW *1000*
unreviewed • confidence 0.00
cause
Break away amps not correct Bad connectors Damaged wire
partial-match • confidence 0.63
cause
Break away amps not correct Bad connectors Damaged wire
unreviewed • confidence 0.00
cause
Break away amps not correct Bad connectors Damaged wire
unreviewed • confidence 0.00
cause
Break away amps not correct Bad connectors Damaged wire
unreviewed • confidence 0.00
cause
Break away amps not correct Bad connectors Damaged wire
unreviewed • confidence 0.00
correction
Found during the sfd the brake amps for the break away was 6.8 which is too low for tandem axle unit Followed the wiring into the 7 way junction box verified correct wiring which was correct Verified voltage in the junction box which was correct Got under the unit and checked amperage at the back of each hub Found the correct amperage to both rear hubs and no amperage at either hub on the front axle Inspected the wiring and found two issues First the connectors from the main wire to split to the brake hubs appeared to be damaged allowing to much play in the wires Second one of he wires from the connector to the drivers side front hub had been rubbing on the leaf spring and had been arcing on the metal Replaced the two connectors for the main wiring then cut and spliced the damaged wire Retested the amps at the break away and found the amps were now 12.2 which is within acceptable range Work completed 1.50hrs
partial-match • confidence 0.63
correction
Found during the sfd the brake amps for the break away was 6.8 which is too low for tandem axle unit Followed the wiring into the 7 way junction box verified correct wiring which was correct Verified voltage in the junction box which was correct Got under the unit and checked amperage at the back of each hub Found the correct amperage to both rear hubs and no amperage at either hub on the front axle Inspected the wiring and found two issues First the connectors from the main wire to split to the brake hubs appeared to be damaged allowing to much play in the wires Second one of he wires from the connector to the drivers side front hub had been rubbing on the leaf spring and had been arcing on the metal Replaced the two connectors for the main wiring then cut and spliced the damaged wire Retested the amps at the break away and found the amps were now 12.2 which is within acceptable range Work completed 1.50hrs
unreviewed • confidence 0.00
correction
Found during the sfd the brake amps for the break away was 6.8 which is too low for tandem axle unit Followed the wiring into the 7 way junction box verified correct wiring which was correct Verified voltage in the junction box which was correct Got under the unit and checked amperage at the back of each hub Found the correct amperage to both rear hubs and no amperage at either hub on the front axle Inspected the wiring and found two issues First the connectors from the main wire to split to the brake hubs appeared to be damaged allowing to much play in the wires Second one of he wires from the connector to the drivers side front hub had been rubbing on the leaf spring and had been arcing on the metal Replaced the two connectors for the main wiring then cut and spliced the damaged wire Retested the amps at the break away and found the amps were now 12.2 which is within acceptable range Work completed 1.50hrs
unreviewed • confidence 0.00
correction
Found during the sfd the brake amps for the break away was 6.8 which is too low for tandem axle unit Followed the wiring into the 7 way junction box verified correct wiring which was correct Verified voltage in the junction box which was correct Got under the unit and checked amperage at the back of each hub Found the correct amperage to both rear hubs and no amperage at either hub on the front axle Inspected the wiring and found two issues First the connectors from the main wire to split to the brake hubs appeared to be damaged allowing to much play in the wires Second one of he wires from the connector to the drivers side front hub had been rubbing on the leaf spring and had been arcing on the metal Replaced the two connectors for the main wiring then cut and spliced the damaged wire Retested the amps at the break away and found the amps were now 12.2 which is within acceptable range Work completed 1.50hrs
unreviewed • confidence 0.00
correction
Found during the sfd the brake amps for the break away was 6.8 which is too low for tandem axle unit Followed the wiring into the 7 way junction box verified correct wiring which was correct Verified voltage in the junction box which was correct Got under the unit and checked amperage at the back of each hub Found the correct amperage to both rear hubs and no amperage at either hub on the front axle Inspected the wiring and found two issues First the connectors from the main wire to split to the brake hubs appeared to be damaged allowing to much play in the wires Second one of he wires from the connector to the drivers side front hub had been rubbing on the leaf spring and had been arcing on the metal Replaced the two connectors for the main wiring then cut and spliced the damaged wire Retested the amps at the break away and found the amps were now 12.2 which is within acceptable range Work completed 1.50hrs
unreviewed • confidence 0.00
Evidence Thread
Stephanie Kendziorski
processor • Apr 2, 2026, 12:45 PM
Submitted PA J01534032
Stephanie Kendziorski
processor • Apr 6, 2026, 9:54 AM
@Brian P Job 1 approved .8
Job 6 approved .1
Job 7 approved 1.0
Job 8 approved 1.5
Job 9 approved .5
Stephanie Kendziorski
processor • Apr 6, 2026, 1:44 PM
@Brian P @Rhianna S I need the invoice for the part on line 7, please. It's over $40 without markup, so I have to attach the invoice to the claim.
Brian Parrott
dealer_or_external • Apr 6, 2026, 2:07 PM
i will move the part to a non warranty job line. It was not part of that job
Stephanie Kendziorski
processor • Apr 6, 2026, 2:43 PM
Submitted all lines for payment
Claim Files
Paid claim.pdf
pdf • Apr 21, 2026, 9:57 AM • 12,504 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/April 2026/Open Range/73133/Paid claim.pdf
Paid claim.pdf
pdf • Apr 21, 2026, 9:57 AM • 12,504 bytes
/home/openclaw/nas/Dropbox/#recycle/MYRV 12024/7- Claims in Process/7.1- Claims Submitted- iCS/Open Range/73133/Paid claim.pdf
73133.pdf
main-pdf • Apr 6, 2026, 2:22 PM • 105,723 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/April 2026/Open Range/73133/73133.pdf
73133.pdf
main-pdf • Apr 6, 2026, 2:22 PM • 105,723 bytes
/home/openclaw/nas/Dropbox/#recycle/MYRV 12024/7- Claims in Process/7.1- Claims Submitted- iCS/Open Range/73133/73133.pdf
73133F.pdf
main-pdf • Apr 6, 2026, 12:58 PM • 433,422 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/April 2026/Open Range/73133/73133F.pdf
73133F.pdf
main-pdf • Apr 6, 2026, 12:58 PM • 433,422 bytes
/home/openclaw/nas/Dropbox/#recycle/MYRV 12024/7- Claims in Process/7.1- Claims Submitted- iCS/Open Range/73133/73133F.pdf
Approval.pdf
main-pdf • Apr 6, 2026, 9:54 AM • 11,904 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/April 2026/Open Range/73133/Approval.pdf
Approval.pdf
main-pdf • Apr 6, 2026, 9:54 AM • 11,904 bytes
/home/openclaw/nas/Dropbox/#recycle/MYRV 12024/7- Claims in Process/7.1- Claims Submitted- iCS/Open Range/73133/Approval.pdf