iClaims Intelligence

CUSTOMER STATES ENTRY DOOR DEADBOLT BINDS Page 1 of 3 © 2026 Integrated Dealer Systems *73740*

partial-match • confidence 0.64

Need to replace said piece of wood with new wood and hardware to properly support bed frame . Will need to dis assemble top panel covering the bed frame . Need to remove panel trim under mattress . Once panel trim is removed we can start to take apart the bed frame to remove broken piece .in order to take apart bed frame need to remove the two connecting pieces of wood that connect to broken piece to gain un obstructed access to area of repair once broken piece is removed we need to duplicate the wood piece with new material.once new wood is cut to size need to attach to wall with wood screws to secure , while in the process of re installing new frame need to check and make sure it is square and level thrusting entire process . Once frame piece is attached to wall need to then connect the two pieces to said repaired piece with clear staples and wood screws .Once wood frame is properly installed need to re install panel trim using trim nails, re install mattress and test for function.requesting 4 hrs for replacement .job done *61488*

partial-match • confidence 0.62

Fridge has came loose from original mount. From factory it seems that there was only one screw on the fridge door hinge holding fridge in place. Need to order new trim piece for under fridge where screw *61488* has backed out and caused damage to trim piece from moving around. Need to remove old trim piece and cut new trim to size and reinstall with screws to existing framing. Once trim is replaced need to fabricate two aluminum brackets to install on top and bottom of fridge to secure properly. Will need to predrill and lay put holes for screws from bracket to fridge. Once brackets are cut and pre drilled need to then paint with a layer of primer allow time to dry. Once primer is dry need to paint with a coat of black paint to match with fridge. Once paint is dry we can then mount brackets to the top and bottom of fridge then place fridge into cabinet and screw brackets into framing around fridge to secure. Requesting 3 hours for repair

partial-match • confidence 0.62

Need to order new trim piece for under fridge were screw has backed out and cause damage to trim piece from moving around. Need to remove old trim piece and cut new trim piece to size and reinstall with new screws to existing framing. Once trim is replaced need to fabricate two aluminum brackets to install on top and bottom of fridge to secure properly .Need to pre-drill and lay out holes for screws from bracket to fridge. Once brackets are cut to size and pre-drilled within me to paint with a layer of primer and allow time to dry. Once primer is dry we can then paint with a layer of black paint.Want to paint is dry we can then mount the brackets on to the top and bottom center of fridge once the brackets are installed we can thenInstall the fridge back into the cabinets.Once fridge is placed back into proper cabinet need to secure brackets from the fridge to the cabinetry to secure fridge in place. Requesting 3 hours for repair. Page 2 of 3 © 2026 Integrated Dealer Systems *73740* Promised Date: 21 AUG 26 W/O: 73740

partial-match • confidence 0.61

CUSTOMER STATES SCREEN DOOR BINDS

partial-match • confidence 0.59