iClaims Intelligence

MYRV 12024 • Paid • prime-time

No evidence summary yet.

Path: /home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/August 2026/Primetime/73564/Paid claim.pdf

Customer complaint foot rest wouldnt open on one of the recliners. First look at the recliner, I could see that the pole handle and cable were lying out on the seat. It appears the cable is bent Turn the recliner on its side to expose the components for the latch and release of the foot rest found the clip that clips into the frame of the recliner that holds the cable in place was broken, pulled out of the frame the spring going between the latch release and the clip is completely unwound holding the clip back in place will release the foot rest and allow it to function correctly. Recommendation will be to replace the entire cable with handle the plastic, retaining clip and spring for the recliner. Examining the recliner on the bottom on the inside on the inside of the foot rest no labels could be found indicating a manufacturer or any information about the actual recliner will have to rely on the photograph of the pole cable and the mechanism underneath the seat. For this job, the recliner will have to be laid out on a bench opened access gain to the block that holds a Page 1 of 4 © 2026 Integrated Dealer Systems *73564* cable next to the seat cushion, possibly removing the cushion itself to get to the screws, unhooking it from Promised Date: 26 JUN 26 W/O: 73564 the latch release for the foot rest rethreading the cable back through the side of the recliner reattaching the handle with the four screws, holding it place reattaching the cable to the latch release clipping the plastic retaining clip into place in the frame. Well, request an additional hour

matched • confidence 0.93

Customer complaint foot rest wouldnt open on one of the recliners. First look at the recliner, I could see that the pole handle and cable were lying out on the seat. It appears the cable is bent Turn the recliner on its side to expose the components for the latch and release of the foot rest found the clip that clips into the frame of the recliner that holds the cable in place was broken, pulled out of the frame the spring going between the latch release and the clip is completely unwound holding the clip back in place will release the foot rest and allow it to function correctly. Recommendation will be to replace the entire cable with handle the plastic, retaining clip and spring for the recliner. Examining the recliner on the bottom on the inside on the inside of the foot rest no labels could be found indicating a manufacturer or any information about the actual recliner will have to rely on the photograph of the pole cable and the mechanism underneath the seat. For this job, the recliner will have to be laid out on a bench opened access gain to the block that holds a Page 1 of 4 © 2026 Integrated Dealer Systems *73564* cable next to the seat cushion, possibly removing the cushion itself to get to the screws, unhooking it from Promised Date: 26 JUN 26 W/O: 73564 the latch release for the foot rest rethreading the cable back through the side of the recliner reattaching the handle with the four screws, holding it place reattaching the cable to the latch release clipping the plastic retaining clip into place in the frame. Well, request an additional hour

matched • confidence 0.93

Customer reported while traveling on the highway they noticed the fender skirt on the driver side slide room was flapping found that it was severely damaged and broken. They did snap it off the remaining piece placed it inside the unit. Recommendation replacement of the fender skirt. This fender skirt will have to be cut to pit since it is a split skirt between the main body of the unit and the slide room. Remaining portion of the screws will have to be removed. Finger skirt have to be reinstalled the fit in one area where the skirt hold completely through the metal will have to be riveted to the unit screws will not be large enough to hold it in place. What the removal cutting to fit reinstallation riveting and re-screwing and recommending ceiling the top of the fender skirt with Page 2 of 4 © 2026 Integrated Dealer Systems *73564* clear silicone request 45 minutes

matched • confidence 0.84

Customer reported while traveling on the highway they noticed the fender skirt on the driver side slide room was flapping found that it was severely damaged and broken. They did snap it off the remaining piece placed it inside the unit. Recommendation replacement of the fender skirt. This fender skirt will have to be cut to pit since it is a split skirt between the main body of the unit and the slide room. Remaining portion of the screws will have to be removed. Finger skirt have to be reinstalled the fit in one area where the skirt hold completely through the metal will have to be riveted to the unit screws will not be large enough to hold it in place. What the removal cutting to fit reinstallation riveting and re-screwing and recommending ceiling the top of the fender skirt with Page 2 of 4 © 2026 Integrated Dealer Systems *73564* clear silicone request 45 minutes

matched • confidence 0.84

CUSTOMER STATES ENTRY DOOR WILL NOT LATCH PROPERLY (MUST SLAM DOOR)

matched • confidence 0.74

CUSTOMER STATES ENTRY DOOR WILL NOT LATCH PROPERLY (MUST SLAM DOOR)

matched • confidence 0.69