iClaims Intelligence

To properly correct the issue the effect of external panel will require full removal and replacement this process involves, removing window assembly and exterior trim components, detach sealants and fasteners securing the panel, carefully remove the damaged panel without affecting surrounding structure, install new replacement panel, resealing all seems, trim, and window window Assembly to manufacturer specifications, leak testing to verify proper sealing integrity 8.00HRS Labor Job # Description Total 1 REPLACE PANELS N/C *59835* Other Services Code Description Qty Price Total SS SHOP SUPPLIES 1.00 N/C N/C Subtotal for Job #1: 0.00 Job #2 - Warranty

matched • confidence 0.98

Exterior side wall panel dent. And pun inspiration, a dent was observed on the exterior side wall panel in the upper section of the unit, identified and marked with a yellow indicator. The damage affects the finish and structural appearance of the panel and its not correctable through repair methods due to the nature of the material. To properly addressed the concern, replacement of the affected exterior panel is required. This procedure will involve; removal of adjacent trim, moldings, and sealants. Removal of nearby components as needed forAccess, lighting, awning, rail, etc. Detachment And removal of the damaged panel. Installation of new exterior panel. Reinstallation of all removed components. Resealing all seams and penetrations to manufacturer specifications. Water intrusion test verify proper ceiling. 8.00HRS

matched • confidence 0.98

Bent stabilizer jack. Upon inspection, the stabilizer jack assembly was found to be bent and out of alignment. The deformation is preventing proper operation and may compromise the units ability to stabilize safely when deployed. Due to the structural nature of the damage, the stabilizer jack cannot be *73272* repaired and will require a full replacement. Repair procedure will include removal of the damage stabilizer jack assembly. Inspection of mounting points and frame attachment for additional damage. Installation of new stabilizer jack assembly. Securing all hardware to manufacturer specifications. Operational testing to verify properExtension, retraction, and stability. Estimated labor time 1 to 1.5 hours Labor Job # Description Total 3 FRONT JACK 0.00 Subtotal for Job #3: 0.00 Job #4 - Warranty

matched • confidence 0.98

Loose J wrap skirting. Customer states lower G rep skirting is loose around unit. Upon inspection, J wrap skirting along the lower tier was found to be loose in sections, with gas visible at seams GEYER, DAWN MARIE Customer #: 59835 and inadequate Vaseline in certain areas. No major damage to the material was observed; condition abuse related to insufficient securing during installation. Repair will involve inspecting entire perimeter of J rap for proper fitment. Repositioning and aligning skirting material. Securing a rap using appropriate fasteners were needed. Tightening existing hardware and additional adding fasteners as required.Ensuring proper fitment and uniform appearance along full length. Verify skirting is properly seated and secure. 1.00HRS Labor Job # Description Total 4 J WRAP N/C Subtotal for Job #4: 0.00 *59835* Job #5 - Warranty

matched • confidence 0.98

Water heater door latch. Upon inspection, the latch securing the water heater access door was found to be damaged and not properly retaining the door in the closed position. Condition for Vince proper ceiling and securement of the access panel. Due to the failure of the latch mechanism, replacement is required to restore proper operation. Repair will involve removal of damaged large component. Installation of new lash assembly. Adjustment to ensure proper alignment and secure engagement. Verification of proper door closure and retention .10HRS Labor Job # Description Total 5 WATER HEATER DIAGNOSTIC TIME N/C

matched • confidence 0.98

Customer states water heater door will not stay closed

matched • confidence 0.91