iClaims Intelligence

MYRV 12024 • Approved / Unpaid • prime-time

No evidence summary yet.

Path: /home/openclaw/nas/Dropbox/#recycle/MYRV 12024/5- Pre-Authorizations Approved- MYRV/Prime Time/73140/73140/WO_73140_JOB_1_2026.04.14_08.47.48.jpg

Filled up black tank all the way until standing water in toilet. filling up gray tank currently to check for leaks. Determined that shower is leaking at the drain underneath the shower. Upon taking it to be dumped a bunch of water built up on the under belly padding from the leaking shower. Directly in the spot that the customer stated. Need one hour to repair. 4/14/26 - Went to go and replace the plumbers putty around the shower drain when I removed it I noticed that somebody have used decor to seal it up. After I cleaned it up around the drain, noticed a notch around the drain circle ..see picture. Going to rebuild to the best of my ability, so customer can use unit. Recommend the shower pan be replaced it will eventually leak, if not replaced. Got the shower drain to stop *59966* leaking but noticed when the shower is shooting to the back wall it drips from the back of the panel in between the wall and the pan underneath. Further recommending for pan replacement. The drain will need to be removed. The shower curtain strips will need to be removed the enclosure will need to be removed. The plumbing for the shower handles that leads to the showerhead will need to be removed. In the pictures there are some measurements and potentially the tag model number. Requesting 4 hours for install. 5/1/26 Remove showerhead and hose and shower valve assembly 1.0 Removed shower curtian slide holder .10 Need to pop all the rivets out of the shower walls .50 Need to remove drain assembly underneath shower pan .20 Need to remove the shower enclosure completely out of the bathroom with very limited space.50 Need to remove attachment points around shower pan .50 Need to install new pan and secure two new attachment points .50 Need to Install P-trap and correctly attach all plumbing points .50 Need to bring back in the shower enclosure and position and attach correctly .50 Need to re-install shower curtain rod .15 Need to reconnect shower valve and handle system and verify plumbing integrity 1.0 Will need to caulk and seal the enclosure to manufacturer specifications .50 Will need to perform drop test to ensure no leaks. .20.

matched • confidence 0.77