Claim explorer / evidence thread
Claim 72906
MYRV 12024 • Stephanie • Paid • prime-time
risk 0.00
deadline Overdue / escalation ready
images 0
matched 0
review 62
Warranty deadline timeline
Track where the claim sits in the recovery workflow, how many days have elapsed, and whether the auto-approval window or payment deadline is already in play.
Uploaded
Completed stage
178d elapsed • 0d remaining
Analyzed
Completed stage
178d elapsed • 0d remaining
Awaiting OEM
Completed stage
178d elapsed • 0d remaining
Auto-Approved
Completed stage
178d elapsed • 0d remaining
Payment Due
Completed stage
178d elapsed • 0d remaining
Escalation Eligible
Completed stage
178d elapsed • 0d remaining
Resolved
Overdue / escalation ready
178d elapsed • 0d remaining • Overdue
AI Claim Analysis
Estimated Recovery Amount
$4,625.00
What this claim may still be worth based on current evidence.
Compliance Score
100/100
Higher is cleaner. Lower means more missing support, more friction, or more OEM pushback.
Violations Detected
2
OEM Response Deadline Exceeded • Payment Deadline Exceeded
Missing Items
62
No active evidence gaps are listed.
Deadline Status
Overdue / escalation ready
178 days open in the visible workflow.
Recommended Action
Escalate to State
This is the fastest next move from the current workflow stage.
Dossier completeness
Dossier has not been generated yet. Evidence presence is not treated as complete.
US dispute readiness
Evidence packet check
Operational preflight for US warranty escalation: packet size, chronology, cross-references, witness checks, source grounding, and backup evidence.
Estimated pack size
30
Proxy count from docs, images, comments, and claim lines. Actual PDF pages still need final preflight.
Evidence packet lane
Condensed packet watch
Close to a bulky packet. Trim, paginate, and preflight before escalation.
Chronology
Ready to order
Visible span: May 7, 2026, 5:36 AM to Jun 25, 2026, 2:54 AM.
Indexed evidence
3 docs / 24 images
Use only the strongest evidence in the escalation packet; keep the rest as support material.
Cross-reference base
Available
Line items, comments, or gap flags can be tied back to supporting material.
Witness verification
Human verification required
Any statement or affidavit output must be checked by the witness before use.
AI / citation gate
Manual check required
Escalation material must keep facts, inferences, citations, and source documents separated.
Expert evidence pressure
Not signalled
No expert-evidence trigger is visible from the current image rollup.
Escalation posture
Escalation watch
178 days open in the visible workflow; risk score 0.00.
Claim Summary
Evidence summary
No evidence summary yet.
Path
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/February 2026/Primetime/72906/Paid claim.pdf
Timeline
First seen May 7, 2026, 5:36 AM • last seen Jun 25, 2026, 2:54 AM
Evidence flags
No active evidence gap flags
Comment Intelligence
Thread depth
8 indexed side comments on this claim.
Latest visible thread signal
Feb 25, 2026, 10:52 AM • processor • Claim 2584547 paid $414.11 check 3113627 2/24/2026
Role mix
Dealer 0 • OEM 0 • Processor 5
Decision cues
Denial signals 0 • info / missing-doc asks 0 • approval signals 11
Best move
Thread shows approval language — verify payment / closeout.
Quick Actions
Back to search results
Run the same search again.
Open focused evidence thread
Jump straight into Dropbox side comments, notes, and support documents.
Open claim explorer
Return to the main recovery queue view.
Open evidence room
See the quick-rule cards first, then open the legal basis only if needed.
Images
document-photo
Black textured panel edge/trim appears separated with exposed rough substrate.
Human interpretation • confidence 0.78
document-photo
Black textured panel has a separated, frayed edge seam with exposed backing.
Human interpretation • confidence 0.78
document-photo
Close-up shows a black textured panel with a detached or separated edge trim.
Human interpretation • confidence 0.91
document-photo
Close-up shows edge seam separation on a black textured panel, marked in yellow.
Human interpretation • confidence 0.93
document-photo
Close-up of a hitch-mounted black component with a separated left-side seam.
Human interpretation • confidence 0.78
document-photo
Close-up of RV rear-mounted black bumper/ladder hardware; no clear damage visible.
Human interpretation • confidence 0.78
document-photo
Close-up of a removed BAT/AUX electrical terminal component with mounting bracket.
Human interpretation • confidence 0.78
document-photo
Removed BAT/AUX electrical breaker shows corrosion at both terminals.
Human interpretation • confidence 0.74
document-photo
Black exterior panel edge trim appears bent and partially separated.
Human interpretation • confidence 0.88
document-photo
Black textured exterior panel edge appears warped or separated near marked area.
Human interpretation • confidence 0.78
document-photo
Close-up of black textured panel with a small scuff/chip near its right edge.
Human interpretation • confidence 0.72
document-photo
Black textured exterior panel with a small scuff/chip near its right edge.
Human interpretation • confidence 0.62
document-photo
Close-up of a black rectangular metal tube/end near a tiled floor; no clear failure shown.
Human interpretation • confidence 0.68
document-photo
Close-up of a black rectangular metal tube or support over a tiled floor.
Human interpretation • confidence 0.62
document-photo
Photo shows a black rectangular RV support/leg foot on a tiled floor; no clear defect visible.
Human interpretation • confidence 0.46
document-photo
Photo shows a black RV stabilizer/landing-gear foot on a workshop floor; no clear damage is visible.
Human interpretation • confidence 0.72
document-photo
Close-up of underside compartment showing a black support/bracket with visible scuffing.
Human interpretation • confidence 0.73
document-photo
Undercarriage photo shows a black bracket/strap assembly with visible surface scuffing.
Human interpretation • confidence 0.58
document-photo
Exterior compartment vent/cover has deteriorated or separated sealant along its upper edge.
Human interpretation • confidence 0.88
document-photo
Exterior vent/hatch top seal is deteriorated and separating.
Human interpretation • confidence 0.88
document-photo
Photo shows a Flagstaff Micro Lite RV exterior corner seam and trim.
Human interpretation • confidence 0.78
document-photo
Scuffed black exterior trim beside a Micro Lite Flagstaff travel trailer.
Human interpretation • confidence 0.78
document-photo
Black textured panel shows a separated or warped edge trim near the lower section.
Human interpretation • confidence 0.62
document-photo
Close-up of black textured panel with a visibly warped or separated vertical edge.
Human interpretation • confidence 0.58
Claim Lines
complaint
CUSTOMER STATES TOILET LEAK FROM BEHIND - MAY BE AT TOILET CONNECTIONS, RUNS DOWN THE BLUE HOSE AND PUDDLES BETWEEN THE SHOWER AND SINK CABINET PATTON, SPENCER RILEY Customer #: 61095
needs-review • confidence 0.31
complaint
CUSTOMER STATES TOILET LEAK FROM BEHIND - MAY BE AT TOILET CONNECTIONS, RUNS DOWN THE BLUE HOSE AND PUDDLES BETWEEN THE SHOWER AND SINK CABINET PATTON, SPENCER RILEY Customer #: 61095
needs-review • confidence 0.31
complaint
CUSTOMER STATES TOILET LEAK FROM BEHIND - MAY BE AT TOILET CONNECTIONS, RUNS DOWN THE BLUE HOSE AND PUDDLES BETWEEN THE SHOWER AND SINK CABINET PATTON, SPENCER RILEY Customer #: 61095
partial-match • confidence 0.40
cause
Loose fitting
needs-review • confidence 0.21
cause
Loose fitting
needs-review • confidence 0.21
cause
Loose fitting
needs-review • confidence 0.05
correction
Found the water connection for the water line to the toilet was not tight. Tightened the fitting Tested with antifreeze since the unit appeared to winterized No leaks found Used 3 gallons of antifreeze to test the unit Work completed .57 hours
needs-review • confidence 0.25
correction
Found the water connection for the water line to the toilet was not tight. Tightened the fitting Tested with antifreeze since the unit appeared to winterized No leaks found Used 3 gallons of antifreeze to test the unit Work completed .57 hours
needs-review • confidence 0.25
correction
Found the water connection for the water line to the toilet was not tight. Tightened the fitting Tested with antifreeze since the unit appeared to winterized No leaks found Used 3 gallons of antifreeze to test the unit Work completed .57 hours
needs-review • confidence 0.06
complaint
CUSTOMER STATES SHOWER PAN NEEDS TO BE SEALED
partial-match • confidence 0.46
complaint
CUSTOMER STATES SHOWER PAN NEEDS TO BE SEALED
partial-match • confidence 0.46
complaint
CUSTOMER STATES SHOWER PAN NEEDS TO BE SEALED
needs-review • confidence 0.18
cause
Missing sealant
needs-review • confidence 0.28
cause
Missing sealant
needs-review • confidence 0.28
cause
Missing sealant
needs-review • confidence 0.11
correction
Cleaned and used white silicone on the whole edge between the shower floor and wall Work completed .20 hours Page 1 of 5 © 2026 Integrated Dealer Systems *72906* Promised Date: 27 FEB 26 W/O: 72906
partial-match • confidence 0.56
correction
Cleaned and used white silicone on the whole edge between the shower floor and wall Work completed .20 hours Page 1 of 5 © 2026 Integrated Dealer Systems *72906* Promised Date: 27 FEB 26 W/O: 72906
partial-match • confidence 0.56
correction
Cleaned and used white silicone on the whole edge between the shower floor and wall Work completed .20 hours Page 1 of 5 © 2026 Integrated Dealer Systems *72906* Promised Date: 27 FEB 26 W/O: 72906
needs-review • confidence 0.25
complaint
CUSTOMER STATES CABINET BELOW BATHROOM SINK HAS HINGES ON BOTH SIDES AND WILL NOT CLOSE
partial-match • confidence 0.40
complaint
CUSTOMER STATES CABINET BELOW BATHROOM SINK HAS HINGES ON BOTH SIDES AND WILL NOT CLOSE
partial-match • confidence 0.40
complaint
CUSTOMER STATES CABINET BELOW BATHROOM SINK HAS HINGES ON BOTH SIDES AND WILL NOT CLOSE
partial-match • confidence 0.55
cause
Screws removed
needs-review • confidence 0.24
cause
Screws removed
needs-review • confidence 0.24
cause
Screws removed
needs-review • confidence 0.05
correction
This unit comes from the factory with hinges on both side to prevent storage under the sink and damaging any of the plumbing *72906* Screws were put back in the hinges as designed Work completed .10 hours
needs-review • confidence 0.29
correction
This unit comes from the factory with hinges on both side to prevent storage under the sink and damaging any of the plumbing *72906* Screws were put back in the hinges as designed Work completed .10 hours
needs-review • confidence 0.29
correction
This unit comes from the factory with hinges on both side to prevent storage under the sink and damaging any of the plumbing *72906* Screws were put back in the hinges as designed Work completed .10 hours
needs-review • confidence 0.12
complaint
CUSTOMER STATES EMERGENCY WINDOW AT BOTTOM BUNK HAS A GAP
partial-match • confidence 0.50
complaint
CUSTOMER STATES EMERGENCY WINDOW AT BOTTOM BUNK HAS A GAP
partial-match • confidence 0.50
complaint
CUSTOMER STATES EMERGENCY WINDOW AT BOTTOM BUNK HAS A GAP
partial-match • confidence 0.45
cause
Window itself off centered
partial-match • confidence 0.36
cause
Window itself off centered
partial-match • confidence 0.36
cause
Window itself off centered
needs-review • confidence 0.21
correction
Found on the rear of the emergency lower bunk window could see light on the back side Removed the set screws at the top Centered the window reinstalled set screws window seals cant see light anymore Work completed .10 hours PATTON, SPENCER RILEY Customer #: 61095
partial-match • confidence 0.36
correction
Found on the rear of the emergency lower bunk window could see light on the back side Removed the set screws at the top Centered the window reinstalled set screws window seals cant see light anymore Work completed .10 hours PATTON, SPENCER RILEY Customer #: 61095
partial-match • confidence 0.36
correction
Found on the rear of the emergency lower bunk window could see light on the back side Removed the set screws at the top Centered the window reinstalled set screws window seals cant see light anymore Work completed .10 hours PATTON, SPENCER RILEY Customer #: 61095
partial-match • confidence 0.39
complaint
CUSTOMER STATES WHEN ENTRY DOOR HANDLE IS CLOSED A SCREW IS STICKING OUT AND DOES NOT SIT FLUSH
partial-match • confidence 0.45
complaint
CUSTOMER STATES WHEN ENTRY DOOR HANDLE IS CLOSED A SCREW IS STICKING OUT AND DOES NOT SIT FLUSH
partial-match • confidence 0.45
complaint
CUSTOMER STATES WHEN ENTRY DOOR HANDLE IS CLOSED A SCREW IS STICKING OUT AND DOES NOT SIT FLUSH
partial-match • confidence 0.40
cause
Bottom base plate for the entry door handle installed at an angle *61095*
partial-match • confidence 0.45
cause
Bottom base plate for the entry door handle installed at an angle *61095*
partial-match • confidence 0.45
cause
Bottom base plate for the entry door handle installed at an angle *61095*
needs-review • confidence 0.30
correction
Removed screw cover Removed both screws straightened the base plate Reinstalled the screws Tested the handle for movement and is working correctly Work complete .05 hours
needs-review • confidence 0.33
correction
Removed screw cover Removed both screws straightened the base plate Reinstalled the screws Tested the handle for movement and is working correctly Work complete .05 hours
needs-review • confidence 0.33
correction
Removed screw cover Removed both screws straightened the base plate Reinstalled the screws Tested the handle for movement and is working correctly Work complete .05 hours
needs-review • confidence 0.09
complaint
CUSTOMER STATES THE OUTLET COVER ON DOOR SIDE NEEDS TO BE SILICONED BETTER
partial-match • confidence 0.35
complaint
CUSTOMER STATES THE OUTLET COVER ON DOOR SIDE NEEDS TO BE SILICONED BETTER
partial-match • confidence 0.35
complaint
CUSTOMER STATES THE OUTLET COVER ON DOOR SIDE NEEDS TO BE SILICONED BETTER
needs-review • confidence 0.33
cause
Silicone cracked on the top and excessive smear of silicone
partial-match • confidence 0.40
cause
Silicone cracked on the top and excessive smear of silicone
partial-match • confidence 0.40
cause
Silicone cracked on the top and excessive smear of silicone
needs-review • confidence 0.11
correction
Scrapped off all old silicone used adhesive remover get remove the finer layer. Page 2 of 5 © 2026 Integrated Dealer Systems *72906* Resealed the black outlet cover on the black side with black silicone Promised Date: 27 FEB 26 W/O: 72906 Work completed .35 hours
partial-match • confidence 0.56
correction
Scrapped off all old silicone used adhesive remover get remove the finer layer. Page 2 of 5 © 2026 Integrated Dealer Systems *72906* Resealed the black outlet cover on the black side with black silicone Promised Date: 27 FEB 26 W/O: 72906 Work completed .35 hours
partial-match • confidence 0.56
correction
Scrapped off all old silicone used adhesive remover get remove the finer layer. Page 2 of 5 © 2026 Integrated Dealer Systems *72906* Resealed the black outlet cover on the black side with black silicone Promised Date: 27 FEB 26 W/O: 72906 Work completed .35 hours
needs-review • confidence 0.16
complaint
CUSTOMER STATES THE BUMPER CAP ON DOOR SIDE IS MISSING
needs-review • confidence 0.25
complaint
CUSTOMER STATES THE BUMPER CAP ON DOOR SIDE IS MISSING
needs-review • confidence 0.25
complaint
CUSTOMER STATES THE BUMPER CAP ON DOOR SIDE IS MISSING
needs-review • confidence 0.33
cause
Cap is missing
needs-review • confidence 0.24
cause
Cap is missing
needs-review • confidence 0.24
cause
Cap is missing
needs-review • confidence 0.14
correction
Replaced cap with new one work completed .05 hours *72906*
needs-review • confidence 0.29
correction
Replaced cap with new one work completed .05 hours *72906*
needs-review • confidence 0.29
correction
Replaced cap with new one work completed .05 hours *72906*
needs-review • confidence 0.14
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - DOOR SIDE
partial-match • confidence 0.47
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - DOOR SIDE
partial-match • confidence 0.47
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - DOOR SIDE
needs-review • confidence 0.33
cause
Silicone cracked front and rear passenger door side corners
partial-match • confidence 0.53
cause
Silicone cracked front and rear passenger door side corners
partial-match • confidence 0.53
cause
Silicone cracked front and rear passenger door side corners
needs-review • confidence 0.33
correction
Scrapped and resealed the front corner PATTON, SPENCER RILEY Customer #: 61095 Reseal rear corner with decal replacement job line Work completed for front .20 hours
partial-match • confidence 0.47
correction
Scrapped and resealed the front corner PATTON, SPENCER RILEY Customer #: 61095 Reseal rear corner with decal replacement job line Work completed for front .20 hours
partial-match • confidence 0.47
correction
Scrapped and resealed the front corner PATTON, SPENCER RILEY Customer #: 61095 Reseal rear corner with decal replacement job line Work completed for front .20 hours
needs-review • confidence 0.23
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - OFF-DOOR SIDE *61095*
needs-review • confidence 0.32
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - OFF-DOOR SIDE *61095*
needs-review • confidence 0.32
complaint
CUSTOMER STATES SILICONE NEEDS TO BE CLEANED & RE-APPLIED AT THE REAR AND FRONT CORNER MOLDINGS - OFF-DOOR SIDE *61095*
needs-review • confidence 0.33
cause
Cracked silicone
needs-review • confidence 0.32
cause
Cracked silicone
needs-review • confidence 0.32
cause
Cracked silicone
needs-review • confidence 0.06
correction
Scrapped and cleaned cracked silicone on the front off door side front lower corner Resealed with clear silicone No cracks found on the rear corner off door side .30 hours
needs-review • confidence 0.32
correction
Scrapped and cleaned cracked silicone on the front off door side front lower corner Resealed with clear silicone No cracks found on the rear corner off door side .30 hours
needs-review • confidence 0.32
correction
Scrapped and cleaned cracked silicone on the front off door side front lower corner Resealed with clear silicone No cracks found on the rear corner off door side .30 hours
needs-review • confidence 0.33
complaint
CUSTOMER STATES REAR ELECTRIC JACKS WILL NOT RETRACT - WHILE CUST. WAS HERE THE JACKS WOULD NOT EXTEND WHEN PUSHING BUTTON AT REAR OF TRAILER
needs-review • confidence 0.27
complaint
CUSTOMER STATES REAR ELECTRIC JACKS WILL NOT RETRACT - WHILE CUST. WAS HERE THE JACKS WOULD NOT EXTEND WHEN PUSHING BUTTON AT REAR OF TRAILER
needs-review • confidence 0.27
complaint
CUSTOMER STATES REAR ELECTRIC JACKS WILL NOT RETRACT - WHILE CUST. WAS HERE THE JACKS WOULD NOT EXTEND WHEN PUSHING BUTTON AT REAR OF TRAILER
needs-review • confidence 0.19
cause
No power
needs-review • confidence 0.27
cause
No power
needs-review • confidence 0.27
cause
No power
needs-review • confidence 0.00
correction
Pulled the switch out of the frame tested for power at the switch no power found. Traced the wires to the fuse block on the frame tested power had 12v coming in power out. Removed fuse block Page 3 of 5 © 2026 Integrated Dealer Systems *72906* Replaced with new fuse block tested jack up and down they now work correctly Promised Date: 27 FEB 26 W/O: 72906 Work completed .40 hours
partial-match • confidence 0.41
correction
Pulled the switch out of the frame tested for power at the switch no power found. Traced the wires to the fuse block on the frame tested power had 12v coming in power out. Removed fuse block Page 3 of 5 © 2026 Integrated Dealer Systems *72906* Replaced with new fuse block tested jack up and down they now work correctly Promised Date: 27 FEB 26 W/O: 72906 Work completed .40 hours
partial-match • confidence 0.41
correction
Pulled the switch out of the frame tested for power at the switch no power found. Traced the wires to the fuse block on the frame tested power had 12v coming in power out. Removed fuse block Page 3 of 5 © 2026 Integrated Dealer Systems *72906* Replaced with new fuse block tested jack up and down they now work correctly Promised Date: 27 FEB 26 W/O: 72906 Work completed .40 hours
needs-review • confidence 0.10
complaint
CUSTOMER STATES UNDER SLIDE ON OFF-DOOR SIDE ELECTRICAL WIRE SUPPORT IS HANGING *72906*
partial-match • confidence 0.41
complaint
CUSTOMER STATES UNDER SLIDE ON OFF-DOOR SIDE ELECTRICAL WIRE SUPPORT IS HANGING *72906*
partial-match • confidence 0.41
complaint
CUSTOMER STATES UNDER SLIDE ON OFF-DOOR SIDE ELECTRICAL WIRE SUPPORT IS HANGING *72906*
needs-review • confidence 0.33
cause
Electric wiring slide out support
needs-review • confidence 0.34
cause
Electric wiring slide out support
needs-review • confidence 0.34
cause
Electric wiring slide out support
needs-review • confidence 0.09
correction
Examined the slide room electric wiring support system. It is completely intact properly secured and holding the wiring as it should be in order for the slide to move in and out without pinching the wires. Work completed .05 hours
needs-review • confidence 0.34
correction
Examined the slide room electric wiring support system. It is completely intact properly secured and holding the wiring as it should be in order for the slide to move in and out without pinching the wires. Work completed .05 hours
needs-review • confidence 0.34
correction
Examined the slide room electric wiring support system. It is completely intact properly secured and holding the wiring as it should be in order for the slide to move in and out without pinching the wires. Work completed .05 hours
needs-review • confidence 0.09
Evidence Thread
Stephanie Kendziorski
processor • Feb 18, 2026, 4:03 PM
Submitted PA 2584547
@Brian P Is the decal going to be warranty? It is billed out here as external, but seems like it would be covered under warranty.
Jeannette Britton
dealer_or_external • Feb 18, 2026, 6:07 PM
The decal is actually on a different WO for replacement only. But the silicone was coming off by the corner molding, which is not on the other WO
Stephanie Kendziorski
processor • Feb 19, 2026, 9:53 AM
@Brian P @Jeannette B
Job 1 approved .2
Job 2 approved .2
Job 3 approved .1
Job 4 approved .2
Job 5 approved .2
Job 6 approved .2
Job 7 approved .05
Job 8 approved .2
Job 9 approved .3
Job 10 approved .4
Job 11 approved .05
Jeannette Britton
dealer_or_external • Feb 19, 2026, 2:35 PM
@Stephanie K For Job #12. That was supposed to go on the other WO. Should I reprint and resubmit to you?
Stephanie Kendziorski
processor • Feb 19, 2026, 4:11 PM
We're good. You don't have to remove it from this one, nothing is billed here and we confirmed that the decal on 72903 is the same.
Stephanie Kendziorski
processor • Feb 19, 2026, 4:17 PM
Submitted for payment
Jeannette Britton
dealer_or_external • Feb 19, 2026, 5:12 PM
@Stephanie K Actually the Parts on Job #12 were removed and added to the other WO
Stephanie Kendziorski
processor • Feb 25, 2026, 10:52 AM
Claim 2584547 paid $414.11 check 3113627 2/24/2026
Claim Files
Paid claim.pdf
pdf • Feb 25, 2026, 10:53 AM • 39,075 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/February 2026/Primetime/72906/Paid claim.pdf
72906F.pdf
main-pdf • Feb 19, 2026, 2:27 PM • 338,302 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/February 2026/Primetime/72906/72906F.pdf
Approval.pdf
main-pdf • Feb 19, 2026, 9:53 AM • 34,993 bytes
/home/openclaw/nas/Dropbox/MYRV 12024/8- Claims Paid/February 2026/Primetime/72906/Approval.pdf