Claim Detail

parts-photo

Visible component: Kwikee Products Co. Inc. black electrical/control module mounted near an amber round light/lens and wiring harness. Label text visible: - “Kwikee” - “PN: 909506000” - “MANUFACTURED” - “Kwikee Products Co. Inc.” - “230 Davidson Avenue” - “Cottage Grove” - “Oregon 97424-9545” - Barcode number appears: “0206496” Condition/damage observed: Module and surrounding area are dusty/dirty. No obvious cracked housing, broken connector, burned wiring, or physical damage visible in this

Human interpretation • confidence 0.00

parts-photo

Visible component: underside-mounted cylindrical electric motor/actuator/solenoid-type part with bracket, wiring, and end cap; likely part needing identification for replacement. Damage/condition: - Heavy rust/corrosion on motor housing, bracket, fasteners, and adjacent metal plate. - Dirt/grime and weathering throughout. - Paper/foil ID label is worn, dirty, and partially illegible. - No obvious break/fracture visible, but corrosion may affect operation. Labels/text: - Barcode label present b

Human interpretation • confidence 0.00

parts-photo

- **Visible component/part:** Close-up of a cylindrical metal component inside an RV assembly, likely a motor/roller/tube or actuator-related part, mounted near sheet metal/ducting and a wood/trim frame. - **Label/text visible:** White manufacturer label is partially blurry/rotated. Readable portions appear to include **“... MACHINE & CORP”**, **“S/N H004452”** or similar, and **“AMPS 11.8”**. Other numbers/date are not confidently legible. - **Damage/condition:** No clear breakage visible. Some

Human interpretation • confidence 0.00

parts-photo

Image shows an underside RV running-gear/axle area with a manufacturer ID label. - **Visible part/component:** Black metal axle/tube or suspension crossmember with attached label; foreground shows a dirty cast metal suspension/brake/axle-related component/arm. - **Label text (image upside down):** - **Dexter Products Co.** - **Serial No.: 191377** - **Series 32** - **Cottage Grove, OR 97424** - **Ph. (541) 942-3888** - **Condition/damage visible:** Heavy dirt, road grime, su

Human interpretation • confidence 0.00

parts-photo

- **Visible damage:** Underbody/mechanical component shows broken/torn mounting area on a gray cylindrical housing. A lower cast mounting boss/ear appears fractured, and there is an irregular hole/break in the housing near the upper left side. Adjacent black/rusty bracketing is bent/damaged and heavily rusted. - **Parts/components visible:** Gray round drive/motor-style housing, central shaft/coupler, rusted cylindrical component on left, metal mounting bracket/plate, underside frame/compartment

Human interpretation • confidence 0.00

parts-photo

Image shows an RV-installed Klauber Machine/KMG 12V gear motor assembly, likely for a slide-out mechanism. - **Visible components:** Cylindrical gold motor body with gray gearbox/end cap, red/black wiring, surrounding wood substrate, yellow spray foam/sealant, and black underbelly/fabric barrier. - **Label text visible:** “KMG / Klauber Machine”; model appears to begin **K0125…C600** but is partially obscured; also shows **HP 1/10**, **VDC 12**, and RPM information not fully legible. - **Visibl

Human interpretation • confidence 0.00

parts-photo

- **Visible item/area:** Interior RV ceiling fluorescent light fixture with the diffuser/cover removed or missing, exposing two tube lamps, sockets/end caps, wiring/ballast area, and metal fixture tray. - **Visible damage/condition:** Fixture appears partially disassembled/open. Beige plastic side/end trim pieces are loose/exposed; left side shows visible wiring and internal components. No clear cracked tube seen; damage to cover/lens or end trim is possible but not fully confirmed from image. -

Human interpretation • confidence 0.00

parts-photo

Image shows underside/mechanical compartment with an exposed rotating drive assembly, likely slide-out/actuator drive hardware. - **Visible components:** rusted steel shaft, couplers, pillow-block/bearing brackets, large rusted pulley/drum/wheel, silver gearbox/motor assembly, wiring harness/connectors, black underbelly panel, yellow foam/sealant/insulation. - **Visible damage/condition:** heavy surface rust/corrosion on shaft, couplers, brackets, and large wheel/drum; corrosion around mounting

Human interpretation • confidence 0.00

parts-photo

Close-up of an underbody mechanical linkage/roller assembly on an RV. Visible components include a rusted cylindrical tube/shaft, heavy steel bracket plates, a through-bolt with nut, washers/spacers, and a light-colored bushing/roller-like piece. Visible condition/damage: - Significant surface rust/corrosion on surrounding steel bracketry and tube. - Bolt/nut hardware appears intact but corroded/dirty. - The bushing/washer/roller area looks worn or compressed; possible misalignment or rubbing a

Human interpretation • confidence 0.00

parts-photo

Image shows an RV mechanical drive assembly inside a compartment/cavity. - **Visible parts/components:** Electric motor with attached cast gear housing/gearbox, vertical shaft/coupler, rusty round tubing/drive shaft, bolted mounting plate/bracket, surrounding frame, spray foam/insulation in wall cavity. - **Visible condition/damage:** Significant surface rust/corrosion on the upper shaft/coupler, bracket hardware, and vertical tube. Mounting plate edge appears corroded. No clear fracture is vis

Human interpretation • confidence 0.00

parts-photo

Close-up of a white GE fluorescent tube installed in a light fixture. Visible printed label reads: “F15T8-CW”, “COOL WHITE”, “15W”, “Made in Hungary,” with GE logo. Surrounding white fixture/housing and partial socket/wiring visible. No clear physical damage, breakage, burn marks, or missing parts visible in this image. Repair/parts context likely identifying replacement lamp/bulb specification for claim line: 15W F15T8 cool white fluorescent tube.

Human interpretation • confidence 0.00