Claim Detail

supporting-image

Claim line 1 image shows diagnostic testing of an electrical control module/board. A Klein Tools CL390 clamp meter/multimeter is connected with red/black leads; display appears to read about “0.01” (likely volts/continuity depending setting). Technician is probing a green terminal/connector area on a blue-labeled module with multiple white/blue/yellow wires and crimp connectors. Visible labels/text: “KLEIN TOOLS CL390,” “True RMS,” meter ranges; module label partially visible: “OUT ROOM CONTROL

Human interpretation • confidence 0.00

supporting-image

Warranty image (LINE 1 -2.jpeg) shows a technician diagnosing an electrical control/module assembly with a Klein Tools CL390 clamp meter/multimeter. A red probe is contacting a terminal/pin on a green plug/connector attached to a black control box with multiple white/blue/yellow wires. Visible label text on module includes partial “... ROOM CONTROL” and terminal markings such as “IN+ / IN-” and “M1+ / M1-” (partially obscured). Meter face shows Klein Tools CL390 markings and electrical ranges.

Human interpretation • confidence 0.00

supporting-image

Warranty claim image (LINE 1 -3.jpeg): Technician is voltage-testing a Firefly Integrations “Multi Room Control” module/board with multiple white/blue/yellow wires and yellow spade connectors. A Klein Tools CL390 digital clamp meter is connected by probes and displays 12.06 V DC, indicating 12V power present at the tested terminal/connection. No obvious physical damage is visible to the module, wiring, or connectors in this photo. Image supports electrical diagnostic/repair context for claim lin

Human interpretation • confidence 0.00

supporting-image

Image shows a BAL Exact-Slide “Slide Out Room Control” module/controller removed or exposed on a work surface. - Visible parts/components: black control box/module with blue label, exposed green circuit board edge with small LEDs/components and two red push buttons. - Labels/text visible: “BAL EXACT-SLIDE,” “SLIDE OUT ROOM CONTROL,” “M2 IN,” “SW IN,” “LED POWER INDICATOR,” “SW OUT,” “M2+,” “M2-,” “12V,” “GND,” “M1+,” “M1-,” “M1 IN,” “www.balrvproducts.com,” “U.S. Patent Pending,” “Made in U.S.A

Human interpretation • confidence 0.00

supporting-image

Claim line linkage: File “LINE 1 -5.jpg” appears related to Line 1. Visible item: BAL Exact-Slide slide-out room control module by Norco Industries / BAL RV Products. Readable labels/text: - “BAL EXACT-SLIDE” - “WITH EMFORCE TECHNOLOGY” - “SLIDE OUT ROOM CONTROL” - “www.balrvproducts.com” - “U.S. PATENT PENDING” - “MADE IN U.S.A.” - Part/ID visible: “10800090” - Some terminal markings partially visible along bottom/side. Damage/condition: No clear physical damage visible in this close-up. Ima

Human interpretation • confidence 0.00

supporting-image

Warranty claim image (LINE 1.jpeg) shows diagnostic testing of an electrical component inside an RV. - **Visible components:** A blue/black module labeled **“B.L. 2xx SLIDE”** / **“AUTO OUT ROOM CONTROL”** with multiple white/blue/yellow wires connected via green terminal blocks. - **Tooling/measurement:** A **Klein Tools CL390 clamp multimeter** is connected with red/black leads to the slide controller wiring/terminals. Meter display appears to show approximately **0.464** (units unclear, like

Human interpretation • confidence 0.00

supporting-image

Image shows a black rectangular metal/plastic mounting plate or cover with top and bottom flanges/tabs and several round screw/bolt holes. Surface has visible scuffs, scratches, dirt/residue, and minor wear, but no clear break, crack, or missing section is visible from this angle. It is lying on a textured floor/work surface. No readable labels, part numbers, or document/screenshot text are present. Repair/claim context: likely documentation for warranty claim line(s) 1-5 showing the removed or

Human interpretation • confidence 0.00